Lan and Wlan E

The article via: http://www.buy-stuff.org/lan-and-wlan-e/20100519

After connecting all devices, you should check your network settings. Do this, open Windows XP, choose Start / Settings / Network Connections. Right-click Local Area Connection and go to the properties. On the General tab should be at least the following elements must be present and checked: Client for Microsoft Networks, File and Printer Sharing for Microsoft Networks "and" Internet Protocol (TCP / IP). If one is missing the hooks, put it. If the option is not available, tie them with a click on the Install button. Then you have to assign each computer and laptop in your network an IP address.

We recommend that you refer to the router automatically. Double-click on your network computers in the properties of the LAN connection, select Internet Protocol (TCP / IP) ". Mark then refer the option "IP address automatically" and confirm your choice with OK. In Windows Vista, open Start / Control Panel / Network and Sharing Center and Internet/Netzwerk-. There, you go to manage network connections. On the next window according to your hardware with the right of the LAN or wireless connection and open the properties. Here, the following entries on the subject, and activates his "Client for Microsoft Networks, File and Printer Sharing for Microsoft Networks," Internet protocol version 4 (TCP / IPv4). This is also available "Internet Protocol Version 6 (TCP/IPv6)" You do not need.

Furthermore, by default, also the "QoS Packet Scheduler", the "I / O Driver Link Layer Topology Discovery" and the entry "response for Link Layer Topology Discovery" is available. These exotic-sounding services provide a balanced network load and help in detecting other devices in the network. After double-click on "Internet Protocol Version 4 (TCP/IPv4)", check "Obtain IP address automatically" and "Obtain DNS server address automatically".

Network Map

Double-click the Network Neighborhood in Windows XP on the desktop. In Vista go to Network via Start button. There you select Entire Network / Microsoft Windows Network. Find the working group, which belongs to your PC. Depending on the version of Windows it is called by default "Workgroup", "working" or "MS-home network. This allows PCs to access the rest of the network should be of the same workgroup. This is accomplished by using all the same workgroup name but different computer names. Click the right to work with XP or Vista on your computer and go to the properties. In XP, go to the Computer Name tab.

About the Change button to customize the information you wish. As a computer name you should use a unique shorthand, for example, "AdamPC" or "EvaNotebook. In Windows Vista, you examine the 'settings for computer name, domain and workgroup "the messages behind" Computer Name "and" working ". Click on Settings and change behind it in the next window, click the Modify command.

View more in: lp-e5 a1185 2133 inspiron 6400 battery travelmate 6000 xps m1330 battery xps m1730 battery